TORQ Stage 2 | 2024+ Toyota Land Cruiser 250 3" Lift Kit + Differential Drop
This product is currently in production. Reserve yours today, and we'll ship your order as soon as it's ready.
Estimated shipping: December 15–31, 2026. Dates are estimates and subject to change.
LEGENDARY BY DESIGN.
ELEVATED BY ENGINEERING.
The Toyota Land Cruiser has earned its reputation through generations of capability and refinement. The TORQ Stage 2 system builds on that legacy with a precision-engineered 3-inch front lift, 1-inch rear lift, and purpose-built cast aluminum differential drop.
A more commanding stance. Thoughtful drivetrain geometry. Premium components designed to complement the character of your Land Cruiser.
TORQ Stage 2 kit shown for the Toyota Land Cruiser 250
MORE THAN A LIFT.
A MORE COMPLETE APPROACH.
Stage 2 begins with TORQ's premium Land Cruiser lift components, engineered for precise fitment and a refined, balanced stance.
We then add a purpose-built cast aluminum differential drop to help address the increased CV axle operating angles associated with lifting the front suspension.
Refined Stance
Approximately 3 inches of front lift and 1 inch of rear lift for a balanced, more commanding appearance.
Thoughtful Geometry
A purpose-built differential drop helps reduce increased front CV axle angles.
Factory Integration
Designed to retain compatible factory springs and shocks without requiring a complete suspension replacement.
THE DETAILS YOU DON'T SEE
MAKE THE DIFFERENCE.
Additional ride height changes the relationship between the front differential and CV axles. Stage 2 addresses that change with purpose-built components.
Conceptual illustration. Actual CV angles vary by suspension position and vehicle configuration.
Conventional Lift
Raising the suspension increases ride height, but can also increase the operating angles of the front CV axles.
TORQ Stage 2
By repositioning the front differential, the system helps reduce CV axle operating angles compared with the same lift without a differential drop.
A differential drop doesn't eliminate all additional drivetrain loads or guarantee against wear. It is a geometry-focused upgrade designed to complement the additional ride height.
ENGINEERING WITH
INTENTION.
The TORQ differential drop uses a purpose-built cast aluminum design with integrated mounting geometry and a refined black finish.
Rather than treating the differential drop as an afterthought, Stage 2 incorporates it as part of the complete suspension system.
- Purpose-built aluminum castings
- Vehicle-specific mounting geometry
- Premium black finish
- Designed to complement the lift system

BUILT DIFFERENT.
ENGINEERED BETTER.
Casting allows complex mounting features and application-specific geometry to be integrated into the component itself. It's a deliberate approach to fit, construction, and design.
Manufacturing comparison is illustrative. Component strength depends on engineering, materials, and testing.
EVERYTHING YOU NEED.
NOTHING YOU DON'T.
Each Stage 2 system brings together the components required for a coordinated lift and differential drop installation.
- Front billet aluminum lift spacers — approximately 3" front lift
- Rear billet aluminum coil spacers — approximately 1" rear lift
- Purpose-built cast aluminum differential drop assembly
- Application-specific mounting hardware
- Installation documentation
Already running a compatible lift on your Land Cruiser 250? Shop the Standalone Differential Drop

A MORE COMMANDING FOOTPRINT.
The right tire combination should complement the Land Cruiser's capability without compromising the refinement that makes it exceptional.
For most builds, 33- to 34-inch-class tires offer an excellent balance of appearance and usability. Selected 35-inch configurations are possible with additional fitment work.
| Tire Size | Diameter | Wheel & Offset | Fitment Guidance |
|---|---|---|---|
| 275/70R18 | 33.2" | Factory 18" wheel | OEM+ Choice. Documented factory-wheel combination. A conservative everyday upgrade. |
| 285/70R17 | 32.7" | 17×8 | +25 mm | Trail-Oriented. Documented combination. Verify brake-caliper clearance. |
| 285/70R18 | 33.7" | 18×8 | +45 mm | Balanced Setup. Attractive 34" class option. Verify steering and liner clearance. |
| 285/75R17 | 33.8" | 17×8.5 | +35 to +48 mm | Suggested Setup. Wheel-specific brake and body clearance verification required. |
| 285/75R18 | 34.8" nominal | 18×8.5 - +30mm | Advanced fitment. Documented on a Land Cruiser 250. Verify upper control arm and fender-liner clearance at full steering lock and through suspension travel. Clearance modifications may be needed. |
| 35×12.50R17 | 35" nominal | 17×8 | +25 mm | Modified Fit. Documented with fender-liner and other clearance modifications. Not a guaranteed no-rub setup. |
These examples are based on documented Land Cruiser 250 installations and suggested wheel configurations. Not every combination has been tested specifically with TORQ Stage 2. Actual clearance depends on trim, tire construction, wheel design, offset, steering angle, and suspension compression.
WHY OFFSET MATTERS.
Wheel offset affects where the tire sits within the wheel opening. Lower offsets move the wheel outward; higher positive offsets position it farther inward.
33" Class
Refined, versatile and well suited to everyday driving and weekend trails.
34" Class
A compelling balance of aggressive appearance and practical off-road capability.
35" Class
An advanced build requiring careful wheel selection and possible clearance modifications.
A suspension lift increases ride height, but does not eliminate clearance limitations during full steering lock or suspension compression. Confirm the complete wheel-and-tire combination before installation.
GOOD QUESTIONS.
ENGINEERED ANSWERS.
What makes TORQ Stage 2 different from the standard Land Cruiser lift kit?
Stage 2 combines TORQ's premium billet aluminum lift components with a purpose-built cast aluminum differential drop to help improve front CV axle geometry.
How much lift does the Stage 2 kit provide?
Approximately 3 inches of front lift and 1 inch of rear lift. Actual height varies by vehicle equipment and suspension condition.
Why is a differential drop included?
Lifting the front suspension changes CV axle operating angles. The differential drop helps reduce those angles by repositioning the front differential.
Does Stage 2 replace my factory shocks?
No. The system is designed to retain compatible factory springs and shocks. It is a spacer-based lift system, not a replacement coilover package.
Will the kit maintain factory ride quality?
Retaining the factory springs and shocks helps preserve familiar ride characteristics. Ride and handling can still change with lift height, tires, loading and alignment.
Can I install 35-inch tires?
Selected 35-inch tire combinations have been installed on Land Cruiser 250 vehicles with appropriate wheels and clearance modifications. A 3-inch lift alone does not guarantee no-rub fitment.
Is professional installation recommended?
Yes. Professional installation is recommended, followed by a complete wheel alignment. Follow the supplied installation instructions and factory torque specifications.
Is TORQ Stage 2 made in the USA?
TORQ's proprietary billet lift components are designed and manufactured in Utah. Contact TORQ for component-specific manufacturing details.
What warranty is included?
TORQ suspension components are backed by our Limited Lifetime Warranty, subject to applicable warranty terms.
BUILT FOR EVERY ROAD AHEAD.
For the road less traveled. The journey worth taking. And every mile in between.
DESIGNED • MACHINED • BUILT IN UTAH