TOYOTA 4RUNNER TRD PRO 2" LIFT KIT
Built Specifically for the 6th Gen TRD PRO
Upgrade your 2025+ Toyota 4Runner TRD PRO with an additional 2 inches of lift while retaining the premium factory TRD PRO suspension.
Unlike standard 4Runner models, the TRD PRO already comes with a factory-raised suspension and approximately 33" tires. The TORQ 2" TRD PRO Lift Kit builds on that factory setup, adding approximately 2 inches of additional front and rear lift for a taller, more aggressive stance and clearance for up to 35" tires with the proper wheel and tire combination.
TORQ's front and rear spacers are precision CNC-machined from 6061-T6 billet aluminum and finished in black anodize for strength, corrosion resistance and a clean OEM+ appearance.
Keep the TRD PRO suspension you paid for. Add the height, clearance and stance you want.
Key Features
2" Additional Lift for TRD PRO
Adds approximately 2 inches of additional front and rear lift beyond the TRD PRO's factory-raised suspension.
Step Up From the Factory 33s
The 6th Gen TRD PRO comes factory-equipped with approximately 33" tires. TORQ's additional 2" lift creates clearance for 34" and 35" tire setups, depending on wheel width, offset and tire dimensions.
Keep Your Factory TRD PRO Suspension
Designed specifically around the TRD PRO suspension so you can gain additional height without replacing the premium factory shocks and suspension components.
CNC-Machined Billet Aluminum
Front and rear spacers are precision-machined from 6061-T6 billet aluminum and black anodized for long-lasting protection and an OEM+ appearance.
Bolt-On Installation
Installs using factory suspension mounting locations with no cutting or welding required. A spring compressor is required for installation of the front spacers.
Designed • Machined • Built in the USA
Designed and manufactured by TORQ Engineering in the USA.
Limited Lifetime Warranty
Built for the long haul and backed by TORQ Engineering's Limited Lifetime Warranty.
WHEEL & TIRE FITMENT
Take advantage of the additional clearance from your TORQ 2" TRD PRO lift. From a subtle OEM+ upgrade to near-35" and 35" tire setups, there are several ways to build your 6th Gen 4Runner TRD PRO.
| TIRE SIZE | APPROX. DIAMETER | FITMENT |
|---|---|---|
| 265/70R18 | 32.6" | Factory TRD PRO tire size |
| 285/70R18 | 33.7" |
OEM+ Upgrade Larger, fuller look while retaining the factory 18" TRD PRO wheels. |
| 295/70R18 | 34.3" |
Aggressive 34" Excellent combination of added height, width and stance. |
| 285/75R18 | 34.8" |
Near-35" Option Tall tire option for owners wanting near-35" height on an 18" wheel. |
| 35×11.50R18 | ~35" |
35" Target Narrower 35"-class option. |
| 35×12.50R18 | ~35" |
Aggressive 35" Maximum visual impact with additional width and stance. |
KEEP YOUR FACTORY TRD PRO WHEELS
The factory 18" TRD PRO wheels provide a great starting point for larger tire combinations. Popular upgrades include 285/70R18, 295/70R18 and 285/75R18 depending on the stance and tire height you're after.
The factory 18" TRD PRO wheels provide a great starting point for larger tire combinations. Popular upgrades include 285/70R18, 295/70R18 and 285/75R18 depending on the stance and tire height you're after.
Fitment Note: Tire dimensions vary by manufacturer. Actual clearance depends on tire width and measured diameter, wheel width and offset, alignment, steering angle and suspension travel. Larger 34–35" combinations may require minor fender-liner or mud-flap adjustment and/or other clearance modifications. Always verify clearance at full steering lock and throughout suspension travel.
What's Included
-
(2) CNC-Machined Billet Aluminum Front Strut Spacers
-
(2) CNC-Machined Billet Aluminum Rear Coil Spacers
-
Grade-8 Mounting Hardware
-
Installation Instructions
Fitment Details
Vehicle: 2025+ Toyota 4Runner TRD PRO
Lift: Approximately 2" additional lift over the factory TRD PRO suspension
Factory Tire Size: Approximately 33"
Maximum Tire Size: Up to 35" with the proper wheel and tire combination*
Factory Suspension: Retained
Spring Compressor: Required
Cutting/Welding: None required
Alignment: Required after installation
Wheel width, offset, tire width, alignment and actual tire dimensions all affect clearance. Some 35" combinations may require minor trimming or clearance modifications.
Installation
The TORQ 2" TRD PRO Lift Kit installs using the factory suspension mounting locations with no cutting or welding required.
A spring compressor is required to safely disassemble and reposition the factory front strut assemblies. Because coil springs store significant energy, TORQ recommends professional installation if you do not have the proper equipment or experience working with loaded suspension components.
An alignment is required after installation.
Looking for a Lift Kit for a Non-TRD PRO 4Runner?
The TRD PRO uses a different factory suspension configuration than standard 6th Gen 4Runner models.
If you have a non-TRD PRO 2025+ 4Runner, check out the TORQ 3" 6th Gen 4Runner Lift Kit.
Built for the TRD PRO
Your TRD PRO already comes equipped with premium suspension. You shouldn't have to replace it just to gain additional height and tire clearance.
The TORQ 2" TRD PRO Lift Kit works with the factory suspension to deliver the stance, clearance and capability you're looking for while maintaining the character of the TRD PRO.
2" Additional Lift • Up to 35" Tires • Factory TRD PRO Suspension • Made in the USA
